|
Indumart
Battery-powered Digital Temperature and Pressure Gauges are high-accuracy
and high-resolution instruments. They are powered with two “AA” batteries,
which last for at least 2 years. These gauges are ideal for critical
industrial applications where particular importance is attached to measuring
accuracy, reproducibility, long-term stability and protection against water
immersion and dust penetration.
The
electronics and sensing element of these instruments are housed in a 4"
diameter, stainless steel case. The four-digit, 12.7 mm high LCD indicator
displays pressure measurements in either of the two selected units of
measurements, and in case of thermometer, temperature may be displayed in
either
°C
or °F.
The operators may switch between the two units at the site.
Covering a
wide range of test and measurement applications, the DG50 pressure gauges
are available in several ranges from vacuum to 6000 psi (40 MPa), and the
DT50 thermometers are available in direct or remote mounting versions in the
ranges of -100 to 800°C
or -50 to 200°C.
The DT50 may
be fitted with the Min/Max option, which stores the minimum and maximum of
the measured temperatures. These temperatures may be displayed or cleared
without opening the sealed case. If ordered with a 4-20 mA output, they
will then function as a 2-wire, loop-powered indicating pressure or
temperature transmitters. They may also be supplied as intrinsically safe
instruments. |
.gif)
.gif)
.gif)
.gif)